Ball Catch Drive In Brushed Chrome
5037BCV
Order information
Delivery policy
Call for Pricing and Availability
Our online store is in catalog mode. Please contact us for pricing and to place an order.
Write your review
Works best with closet and pantry doors
Works best with closet and pantry doors. Adjustable to fit your needs is any design aspect. Easy to install.
TECHNICAL SPECIFICATIONS
Product №
5037BCV
Diameter
1 in
Strike Plate Width
35.4 mm
Strike Plate Length
57.1 mm
Manufacturing Material
Metal
Door Type
Wood
Thickness
1.2 mm
Handing Position / Opening Side
Reversible for Left or Right
Usage
Hinge Door
Height
21.3 mm
Width
21.3 mm
Length
29 mm
Screw/Nail
Included
Width
26.4 mm
ADVANTAGES AND BENEFITS
Works best with closet and pantry doors.
IMPORTANT INFORMATION
Mounting screws included.
- Plate: 2 1/4 in (57.10 mm) long, 1 3/8 in (35 mm) wide, 1/32 in (0.79 mm) in gauge
- Ball catch: 1 5/32 in (29 mm) long, for 1 in (25.40 mm) bored hole
- Plate: 2 1/4 in (57.10 mm) long, 1 3/8 in (35 mm) wide, 1/32 in (0.79 mm) in gauge
- Ball catch: 1 5/32 in (29 mm) long, for 1 in (25.40 mm) bored hole
APPLICATION
Step 1: Mark desired location of door. Drill a hole 27/32 in (21.43 mm) in diameter, 1 1/4 in (31.75 mm) deep.
Step 2: Set the body in the hole by pressing down.
Step 3: Ensure strike plate is aligned with ball catch on the door frame.
Step 4: Use mounting hardware provided to tighten strike plate.
Used on doors with dummy knobs or levers to form a secure closure.
Step 2: Set the body in the hole by pressing down.
Step 3: Ensure strike plate is aligned with ball catch on the door frame.
Step 4: Use mounting hardware provided to tighten strike plate.
Used on doors with dummy knobs or levers to form a secure closure.
16 other products in the same category: